The Ortofon OM S-120-S-SH4 is a ready-to-use S-120 cartridge/stylus premounted on an SH-4 Serato branded headshell.
What's included?
1 - OM S-120 Cartridge
1 - S-120 Stylus
1 - SH4 Serato Headshell
Due to its new design and patent pending technology, the S-120 offers superior tracking ability. It sets new standards in stability and is capable of tracking the most extreme cuttings.
The S-120 rides more evenly in a groove with less bias or skate than any other cartridge design and has an exceptionally low degree of wear on the vinyl, making it perfect for collectible vinyl, control vinyl and 12” dance singles – especially louder pressings that are prone to jumping out of the groove.
Technical Specifications:
| Output voltage at 1000Hz, 5cm/sec. | 10 mV |
| Channel balance at 1kHz | 1.5 dB |
| Channel separation at 1kHz | 20 dB |
| Channel separation at 15 kHz | 15 dB |
| Frequency range at -3dB | 20-18,000 Hz |
| Frequency response | 20-18,000 Hz +3dB/-2dB |
| Tracking ability at 315 Hz at recommended tracking force | 120 μm |
| Compliance, dynamic lateral | 11 μm/mN |
| Stylus type | Spherical |
| Stylus tip radius | R 18 μm |
| Tracking force range | 1,5-10,0 g (15-100 mN) |
| Tracking force recommended | 4.0g (40 mN) |
| Tracking angle | 20° |
| Internal impedance, DC resistance | 1,680 Ohm |
| Internal inductance | 920 mH |
| Recommended load resistance | 47 kOhm |
| Recommended load capacitance | 200-600 pF |
| Cartridge weight | 5.5 g |
| Replacement stylus unit | S-120 |
