You're looking for an edge. You like to be able to load in and load out alone. You need a system that will cover a large area. You need more sound from less space and less weight. Because smaller tops are easier to lift. Because you want more sound, not bigger speakers. Because you don't want the same boring speakers as everyone else. Because you think DJs deserve kick-ass monitors. The DiaMon doesn't waste any energy or space trying to deliver the lows that the subs can handle perfectly well. Its power is concentrated on the very important job of delivering loud, clear mids and highs. Enough to keep up with several large subs. A high-efficiency 12" midrange/woofer with a 3" compression driver tweeter firing through the middle is loaded into a cabinet that's as small as possible, just big enough to hold the driver, the 1200W amp, and the DSP electronics.
Specifications:
Loudspeaker Description
2-Way Single 12" Self-Powered Direct Radiating Co-axial Point Source Mid-High
Frequency Response (±3 dB)
80 – 18,000Hz (Full Range - Preset 1) +-3 dB
Maximum Sustained Output
123 dB SPL 1m half-space
Max SPL (Peak)*
126 dB SPL 1m half-space (Limited in full-range)
Nominal Dispersion (H° x V°)
80 x 80 (Conical)
Amplification
1200 W Class D, 2 Channel
Processing
Integrated comprehensive DSP. 96kHz sampling rate with 8 pushbutton presets. All presets include high pass filters, low pass filters, phase alignment, equalization and multi-stage limiting. Storage apacity for up to 100 presets
Electrical Connector Amp
Neutrik powerCON True 1 TOP IP65 rated waterproof connectors
Electrical Connector Mains
Standard US 3-pin grounding 120V electrical plug: NEMA 5-15 (Edison)
Voltage Operating Range
100-240V AC, 50-60Hz (Auto-sensing, auto switching universal supply)
Current Draw 120V
1.4 Amps (Nominal)
Current Draw 240V
0.7 Amp (Nominal)
Signal Input Connector
XLR-F
Signal Output Connector
XLR-M (direct pass-through only)
Enclosure Type
2-way active mid-high. Direct radiating sealed 12″ LF, co-axial horn-loaded HF
Transducer Low Frequency
1 x 12 in. diameter (300mm) neodymium motor woofer with 3 in. (76 mm) copper winding voice coil
Transducer High Frequency
1 x 3 in. (76mm) diameter diaphragm compression driver with 1.4" (35mm) exit through 80 degree conical wave guide machined from aluminum ploe piece in the center of the midrange driver
Cabinet Construction
CNC machined 18 and 15mm Birch plywood with dado joinery. 1 x 35mm steel pole socket
Exterior Finish
High-pressure, bonded polyurea coating. Rugged, waterproof. Textured black
By creating an account at agiprodj you will be able to shop faster, be up to date on an orders status, and keep track of the orders you have previously made.
Dealer
EZ Returns
Match
